38
accessing address is telnet 192.168.1.70 8023
RTP Initial Port Set the RTP Initial Port. It is dynamic allocation.
RTP Port Quantity Set the maximum quantity of RTP Port, the default is 200.
Notice:
1. You need save the configuration and reboot the phone after set this page.
2. If you modify the port of Telnet and HTTP, you would better set the value more than 1024
because the port value less than 1024 is system port reserved.
3. If you set 0 for the HTTP port, it will disable HTTP service.
3
3
.
.
2
2
.
.
5
5
D
D
H
H
C
C
P
P
S
S
e
e
r
r
v
v
e
e
r
r
Field name Explanation
DHCP Leased Table IP-MAC mapping table. If the LAN port of the phone connects to a
device, this table will show the IP and MAC address of this device.
To Next Page
Loading...
