87
4
4
.
.
5
5
C
C
a
a
l
l
l
l
T
T
r
r
a
a
n
n
s
s
f
f
e
e
r
r
1. Blind Transfer
During talk, press or Soft2 (Transf), and then dial the number that you want to transfer to,
and finished by "#". Phone will transfer the current call to the third party. After finishing transfer,
the call you talk to will be hanged up.
2. Attended Transfer
During talk, press or Soft2 (Transf), then input the number that you want to transfer to
and press Soft2 (Send). After that third party answers, then press
to complete the transfer.
(You need enable call waiting and call transfer first). If there are two calls, you can just talk to one,
and keep hold to the other one. The one who is keep hold can not speak to you or hear from you.
3. Alert Transfer
During the talk, press or Soft2 (Transf) firstly, then press Soft2 (Send) after inputting the
number that you want to transfer. You are waiting for connection, now, press
or Soft2
(Transf) and the transfer will be done. (To use this feature, you need enable call waiting and call
transfer first)
4
4
.
.
6
6
C
C
a
a
l
l
l
l
H
H
o
o
l
l
d
d
During talking, user could press to hold the current call. Press again to return the call
or switch the call active.
4
4
.
.
7
7
3
3
-
-
w
w
a
a
y
y
C
C
o
o
n
n
f
f
e
e
r
r
e
e
n
n
c
c
e
e
C
C
a
a
l
l
l
l
User can press Soft1 (Conf) to dial the line2 (press Soft1 (Answer) to answer the call directly if this call
is from line2) during talking with line1. After line2 connect, user can press Soft2 (Conf) select another
way into the three-way calling number, then press softkey1-OK to enter into conference mode. To back
to line1 from conference, please press Soft1 (Split); to end the call, please press Soft3 (Close) or press
.
4
4
.
.
8
8
C
C
a
a
l
l
l
l
R
R
e
e
c
c
o
o
r
r
d
d
s
s
The IP Phone supports 100 items of missed call, 100 items of incoming call, and 100 items of dialed call.
If the records are full, the newest will replace the oldest. If phone’s power cut or reboot, call records will
be discarded.
z Missed call
Press and screen displays “Missed Call” with the number and time of missed call. User
can also use
& to browse the missed call records, or press Soft1 (Option) to
check the details of this record, then press Soft2 (EDial) again to change the current number.
Pressing Soft2 (Dial) will call this number directly if user don’t modify the number. If there is no
missed call, screen will show “List Is Empty”.
To Next Page
Loading...