59
Enable Call Transfer Enable Call Transfer by selecting it.
Enable Call Waiting Enable Call Waiting by selecting it.
Enable Three Way
Call
Enable Three Way Call
Accept Any Call
If select it, the phone will accept the call even if the called number is
not belong to the phone.
Auto Handdown
The phone will hang up and return to standby automatically at hands-
free mode
Auto Handdown
Time
Configuration automatically hang time, if it is hands-free mode, then
more than auto handdown time, the phone automatically returns to
standby mode, if the handle pattern, then more than auto handdown
time, it automatically put a dial tone.
Mute Mode
Configuring the mute mode, if the mute mode, calls LCD will flash tips,
but does not ring
XML Server Xml configuration server address and the default xml file name
Warm Line Time
Warm line set timeout to set the time line when more than warm, it will
automatically exhaled hotline number, if configured to 0, the hook
immediately exhaled hotline number.
DND Return Code
When the status of the IP phone is “DND (do not disturb)”, it will send
a message to the server based on the code selected here.
Reject Return Code
When the status of the IP phone is “Reject”, it will send a message to
the server based on the code selected here.
Busy Return Code
When the status of the IP phone is “Busy”, it will send a message to the
server based on the code selected here.
Black List
Set Add/Delete Black list. If user does not want to answer some phone
calls, add these phone numbers to the Black List, and these calls will be
rejected.
“x” and “.” are wildcard. x means matching any single digit. for
example, 4xxx expresses any number with prefix 4 which length is 4
will be forbidden to dialed out
“.” means matching any arbitrary number digit. For example, 6
expresses any number with prefix 6 will be forbidden to dialed out.
If a user wants to allow a number or a series of number incoming,
To Next Page
Loading...
