Draytek VigorSwitch G2240 - Status

VigorSwitch G2240 User’s Guide
104
reAuthMax(1-10): The number of authentication attempt that is permitted
before the port becomes unauthorized.
Default: 2
txPeriod(1-65535 s): A time period to transmitted EAPOL PDU between the
authenticator and the supplicant.
Default: 30
Quiet Period (0-65535 s): A period of time during which we will not attempt to access
the supplicant.
Deafult: 60 seconds
reAuthEnabled: Choose whether regular authentication will take place in this port.
Default: ON
reAuthPeriod(1-65535 s): A non-zero number seconds between the periodic
re-authentication of the supplicant.
Default: 3600
max. Request(1-10): The maximum of number times that the authenticator will
retransmit an EAP Request to the supplicant before it times
out the authentication session. The valid range: 1 – 10.
Default: 2 times
suppTimeout(1-65535 s): A timeout condition in the exchange between the authenticator
and the supplicant. The valid range: 1 –65535.
Default: 30 seconds.
serverTimeout(1-65535 s): A timeout condition in the exchange between the authenticator
and the authentication server. The valid range: 1 –65535.
Default: 30 seconds
2
2
.
.
1
1
0
0
.
.
3
3
S
S
t
t
a
a
t
t
u
u
s
s
Function name:
802.1X Status
Function description:
Show the each port IEEE 802.1X authentication current operating mode and status.