1
VAPOR-LOGIC
®
VERSION 6 INSTALLATION AND OPERATION MANUAL
Vapor-logic capabilities
ACCURATE, RESPONSIVE CONTROL
The Vapor-logic controller provides accurate, responsive RH control. PID control
tunes the system for maximum performance.
Modbus
®
, BACnet
®
, or LonTalk
®
allow interoperability with multiple building
automation systems. Modbus is standard, and BACnet or LonTalk are available
options.
Web interface, provides the capability to set up, view, and adjust humidifier
functions via Ethernet, either directly or remotely through a network.
USB port allows easy firmware updates, and data backup and restore
capability.
Real-time clock allows time-stamped alarm and message tracking, and
accurate drain and flush scheduling.
Auxiliary temperature sensor/transmitter allows temperature compensation
control to prevent window condensation, or air temperature monitoring, such
as in a duct.
Programmable outputs allow remote signaling and device activation.
Multiple-humidifier control allows staged control of up to 8 humidifiers with
one controller.
Controller data, such as RH, air temperature, water use, energy use, and
alerts can be downloaded to a PC for viewing and analysis. RH, alerts, and
messages can also be viewed on the display and Web interface.
More capabilities on the next page >
OVERVIEW
To Next Page
Loading...
