11
VAPOR-LOGIC
®
VERSION 6 INSTALLATION AND OPERATION MANUAL
• Communication connections
• Vapor-logic display
• Ethernet
• Modbus
• BACnet
• LonTalk
• Multiple-tank communication
• Programmable relays
• Area-type, SDU dispersion fans, or steam blowers
2. Complete the Setup process.
See instructions beginning on Page 27.
3. Start up humidifier(s).
See instructions on Page 35.
Refer to the Pre-installation Checklist and drawings on the previous pages, and
then make the field wiring connections as described on the following pages.
Installation process
INSTALLATION
To Next Page
Loading...
