48
VAPOR-LOGIC
®
VERSION 6 INSTALLATION AND OPERATION MANUAL
Status LED (Touchscreen)
OPERATION
STATUS LED (TOUCHSCREEN)
The LED on the Vapor-logic touchscreen is located on the front, just below the active touch area. It remains solidly lit as
long as there is power (even when the Touchscreen is in sleep mode). The color indications are similar to those for the
Vapor-logic LED but it does not have a three blink sequence.
Table 48-2:
Touchscreen LED indicators
LED Indicator Mode Demand/call for humidification
Green Auto mode: no faults Humidification demand is present
Yellow Auto mode: active alert preventing unit from running —
Red Auto mode: active fault preventing unit from running —
Blue Standby mode or auto mode No humidification demand present
To Next Page
Loading...
