Drobo 8D - Page 115

Drobo 8D User Guide 115
● Serial # - The serial number of the selected drive.
● Firmware - The firmware version for the selected drive.
● Health - The health status of the drive, based on the errors identified by Drobo while using the
drive. Values include:
● Failed (blinking red) - Indicates that the drive has failed and needs immediate
replacement.
● Warning (orange) - Indicates that the drive is almost full and you need to add
capacity soon.
● Critical (red) - Indicates that the drive is full and you need to add capacity now.
● Good (green) - Indicates that the drive is healthy and no action is needed.
Note:
In addition, if the drive is a Solid State Drive (SSD), the percentage of health is reported.
● Capacity - The drive size.
● Drive Type – Options include SSD or HDD.
● Drive Interface – The drive type. It can take one of the following values: SATA/SSD.
● Drive Rotational Speed - For HDDs where the rotational speed cannot be determined, speed is
displayed as 'Unknown'.
Rotational speed is not displayed for SSDs, it is displayed as 'Non-rotating'.
Related topic:
Checking Storage Usage and Device Status Information