Drobo 8D - Page 121

Drobo 8D User Guide 121
Blinking Yellow and Green: Do not remove these drives or power
down. The Drobo device is working to protect your data.
Solid Red: Add a drive or replace the current drive with a larger drive
immediately. The Drobo device is critically low on space. See Adding
Drives
Blinking Red: Replace this drive immediately. This drive has failed.
See Adding Drives
Power Light
Green: The power is on and the Drobo device is ready.
Yellow: The Drobo device is in the process of powering on.
Red: Tour Drobo device has overheated. Safely power down the Drobo
8D, disconnect the data cable and then the power cable. Let it cool down
and then restart.
Activity Light
Blinking Green: Data is actively being transferred between your Apple
Mac™ and the Drobo device. Do not remove or add drives during this
process.
Capacity Gauge
Blue: Displays the percentage of the Drobo device that is full, in 10%
increments. There are 10 capacity gauge lights. So, for example, if the
Drobo device is 30% full, three blue lights display.
SSD Light/Status
Indicator
Green: No action is required, SSD is healthy.
Red: Disk failure