DSC Touch-SCW9067

INSTALLATION
AUTO LEARN SENSOR
1. Select “Auto Learn Sensor”
2. Open and close or tamper a sensor to enroll. Image
sensors have a 2 min enrolling window.
3. Panel will chime and display the sensor’s DL code, select
OK to confirm.
4. Use drop down menus and “smart” filters to program
Sensor Group, Chime etc..
5. Select “Add New” to complete and move to the next sensor.
FIND IT
Settings
Installation
Security Sensors
Auto Learn
Sensor
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page of 24 114
© Last updated 4/29/15 All rights reserved