Toggles all sensor and panel trouble beeps on or off
Panel sounds when a sensor’s battery is low. Chime type and frequency are set below.
Panel sounds when a sensor is tampered. Chime type and frequency are set below.
Panel sounds when tampered or opened. Chime type and frequency are set below.
Select the chime type for Sensor Low Battery, Sensor Tamper, and Panel Tamper.
Determines the amount of time between each trouble beep. Length can be set between
3-60 mins. (default is 60 mins). Note: for UL/cUL the maximum time between trouble
beeps shall be set to 1 minute.
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page of 56 114
© Last updated 4/29/15 All rights reserved
To Next Page
Loading...
Need help?
General
