Controls the master volume for the entire panel and all its audible functions (except siren)
including tones, videos, voice chimes, etc
Allows you to select from various chimes for each individual device.
Indicates whether the panel should “speak.” Sensors, Panel messages, Safety Sensors, and
home control device actions can all be toggled independently. (unchecking a box disables
the individual feature, unchecking the primary box disables all)
Indicates whether the panel should emit tones/beeps. Sensors, Panel and Safety Sensors
can all be toggled independently. (unchecking box disables feature)
The DSC Touch sound settings can be found here as well as inside the
“apps" section of the panel on the home screen. Master Code has access to
this section as well as installer code.
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page of 55 114
© Last updated 4/29/15 All rights reserved
Note: the DSC Touch also sounds a Piezo siren in three different tone patterns based on police, fire, or medical
emergencies. The priority of the alarms is as follows: Fire, CO Alarm, Burglary. Siren is not controlled in the
“sound” settings.
To Next Page
Loading...
Need help?
General
