DSC Touch-SCW9067

TROUBLESHOOTING
AUTOMATIC SOFTWARE UPDATES
FIND IT
?
QUESTIONS? Contact us at 800-387-3630 or
tech@dsc.com
SUPPORT
Turning on automatic software updates enables the panel to check for new software version
every 24hrs by default.
Touch “Settings”
Enter Installer code (default is 5555)
Touch “Installation”
Touch “Upgrade Software”
Make sure the “Automatic Updates” button is checked.
Change update interval by selecting “Automatic Upgrade Interval”
Note: For UL/cUL the automatic software update feature shall not be enabled.
Settings
Installation
Upgrade
Software
Installer Code Access
Master Code Access
DSC Confidential and Proprietary Page of 93 114
© Last updated 4/29/15 All rights reserved