DSE DSE890 - Gsm (Dse890 Gateway Only)

Setup
Page 35 of 53
057-165 ISSUE: 9.0
5.4.3 GSM (DSE890 GATEWAY ONLY)
NOTE: GSM configuration is not available with DSE891 Ethernet Gateway
®
.
Parameter
Description
Use GSM
Selection for connection to DSEWebNet® Server:
 = GSM (GPRS) over 2G or 3G network depending upon installation of a
suitable SIM card.
 = Ethernet via external broadband modem connection.
Operator
Name of the GSM network operator. This must be the exact name as provided
by the SIM card supplier. If this is not provided, leave this box empty.
PIN
PIN of the SIM card (where used).
NOTE: When using the SIM card from a cellphone, this is the PIN
number of the SIM card, NOT the PIN number of the cellphone!
APN
GPRS Access Point Name, provided by the SIM card supplier.
Username
Password
GPRS login details, provided by the SIM card supplier.
Message Centre
SMS message centre number, provided by the SIM card provider.
Apply
Click Apply to register the settings then click Save Config to restart the
DSEGateway
®
and connect with the new settings.