Directions
This function allows you to set the mode in which the
directions are displayed.
●
Select the Interactive Menu (B, Fig 80) by
pressing and holding (1) down for a long
time.
●
Use (1) and (2) to select item “Turn by
turn” (C, Fig 80) and press the ENTER (3).
●
Select the “Directions” item (D, Fig 81)and press
ENTER (3).
The submenu is displayed and includes the following
available modes:
●
"Voice + Visual" (I), directions are displayed both
via audio and graphically on the instrument
panel (refer to the "Turn by turn screen" section).
●
"Visual only" (J), directions are displayed only
graphically on the instrument panel (refer to the
"Turn by turn screen" section).
●
“Voice only" (K), directions are displayed only via
audio.
●
"Back" closes the current submenu.
Use (1) and (2) to select the desired item.
Press the ENTER (3) to confirm.
10:34
am
10:34
am
10:34
am
Voice + visual
Visual only
Visual only
Voice only
Voice only
Back
I
J
K
Fig 82
141