Changing Riding Mode
- Press (B, Fig 97).
- System opens the specific page (Fig 98) from
which it is possible to scroll the available Riding
Mode and view their parameters, together with
the relevant by means of joystick
.
- Press ENTER to confirm.
To exit the page without making any changes, press
and hold the joystick in the position for a long
time.
As soon as the new Riding Mode is confirmed, the
instrument panel checks the following conditions:
- If speed is lower than or equal to 5 km/h (3 mph)
and control is open, the message Close
is displayed; the new Riding Mode is
confirmed and stored only when control
is closed and then the main screen is displayed.
- If speed is lower than or equal to 5 km/h (3 mph),
control is closed but brakes are
actuated, the message Release brakes is
displayed. The new Riding Mode is confirmed
and stored only when brakes are released and
then the main screen is displayed.
- If both of the above conditions occur, the
message "Close and release brakes" is
Fig 97
DQS off
Preload 16
Rear susp. default
Front susp. default
DWC 2
ABS 2
DTC 4
Engine high
URBAN
TOURING
SPORT
ENDURO
ENDURO
km/h
0
Fig 98
115
To Next Page
Loading...
