In mirroring mode the joystick is used exclusively to
navigate through the elements shown in the Ducati
Connect window.
To exit mirroring mode, hold the joystick in position
for a long time to return to Home and then hold
the joystick in position again for a long time to
display the main instrument panel screen.
Note
If the screen is locked, mirroring
operation is disabled.
Note
In case of connected overheating,
the operating systems can suddenly close the
applications, with consequent loss of mirroring.
Note
The operation of the system is based on the
WiFi connection. The USB is for
charging only.
Note
If the connection with the Ducati Connect App
is lost and the Ducati Connect item in the Interactive
Menu turns grey, stop and the App by
repeating the First Connection procedure.
Note
The operating systems and technological
choices of are not under Ducati's
control. The instrument panel functions have been
tested and validated with the main available
(e.g. Samsung S10, Samsung S9,
Oneplus 6, Huawei P9, iPhone X, iPhone XS, iPhone
8, etc.) and with operating systems higher than
Android 9 and iOS13. For this reason, it is not possible
to guarantee operation on all on the
market and their and firmware.
stop - Mirroring
During stops, reconnection to the Ducati
Connect App is automatic. stops means 30 40
seconds.
Note
During stops, it is suggested to leave the
key-ON to facilitate automatic reconnection of the
Ducati Connect App.
Long stop Mirroring
To the mirroring:
- wait for the phone, and network icons to
turn blue;
143
To Next Page
Loading...
