- in case of prolonged ABS or Traction Control
intervention;
- in case of a leaning angle of more than approx.
50°.
In this condition, the cruising speed in the main icon
and the distance icon turn grey.
If the system operating conditions are verified,
speed control can be reactivated by pressing RES/+
(D, Fig 119) or SET/- (E, Fig 119). If RES/+ (D, Fig 119)
is pressed, the set cruising speed is the last speed
stored. If SET/- (E, Fig 119) is pressed, the set cruising
speed is the current speed.
Do not reactivate the control with the
previously stored cruising speed if the current road,
and weather conditions do not allow it. Failure
to comply will increase the risk of accidents.
Override
It is possible to accelerate manually while using the
Adaptive Cruise Control system: at this stage, the
Adaptive Cruise Control temporarily stops
controlling the speed of the motorcycle. If this
manoeuvre is carried out while remaining below 180
km/h (112 mph), once the is released, the
Adaptive Cruise Control will resume speed control on
its own.
During override, Adaptive Cruise Control check
of the distance from the vehicle ahead of the
motorcycle is temporarily deactivated in favour of
manual control by the rider.
The rider is always responsible for compliance with
the speed limits and, more generally, the road
regulations in force in the country in which s/he is
riding, as well as for the way the motorcycle is ridden.
157
To Next Page
Loading...
