Blind Spot Detection -
This function allows enabling or disabling the BSD
Blind Spot Detection function.
- Use the joystick
to select menu"
from the Interactive Menu and press ENTER.
- Select the "Blind Spot Detection" option and
press ENTER.
- Select the item and press ENTER.
On and statuses are displayed on the
side. While the currently set status is shown on the
right. The motorbike graphics related to the selected
status is displayed in the middle.
Using the joystick
it is possible to scroll and
select the desired status. Press ENTER to confirm
and return to the previous menu.
If the system is set to On, the LEDs on the rear-view
mirrors turn on briefly upon the key-on.
Off
Blind Spot Detection > Dimmer
Fig 200
226
To Next Page
Loading...
