Erase data
This item is only displayed if laps have previously
been recorded.
- Use the joystick
to select menu"
from the Interactive Menu and press ENTER.
- Select the Lap item and press ENTER.
- Select the Erase data item and press ENTER to
erase the data.
The message Wait… is then displayed for a few
seconds (Fig 225), followed by the message Erased
for a few seconds. The previous screen will then be
displayed without the Erase data item.
Service
Tyre calibration
Lap
Date and time
Tyre pressure
Erase data
Off
Lap data
On
Fig 224
Wait…
Service
Tyre calibration
Lap
Date and time
Tyre pressure
Erase data
Lap data
On
Fig 225
239
To Next Page
Loading...
