Pairing
This function allows pairing a new Bluetooth device.
- Use the joystick to select menu"
from the Interactive Menu and press ENTER.
- Select the Bluetooth item and press ENTER.
- Select the Pairing item and press ENTER
(Fig 240).
The 3 types of devices that can be paired are
displayed: rider headset, passenger
headset (Fig 241).
Use the joystick
to select the type of device you
wish to pair. Press ENTER to confirm and the
device search.
The instrument panel searching for nearby
Bluetooth devices and displays the message "Wait..."
followed by a list of detected devices (Fig 242). As
soon as the search stage is over, system gives out a
list of all detected devices.
Use the joystick
to select the desired device and
press ENTER.
The display shows the message "Pairing…" on the
right, while waiting validation by the Bluetooth
device. If you are pairing a the
instrument panel and display of the will
Rider
Phone
Pairing
Passenger
1
2
Fig 241
Samsung S7
iPhone 8
Phone
Wait…
Fig 242
248
To Next Page
Loading...
