Duplo DBM-150T - Page 31

1-21
Chapter 1 Before Operation
No. Name QTY Function
[6] Side guide B (L) 1 When stapling paper whose length is 279 mm/10.98 inches or more or
when the CORNER AND STAPLE KIT has been attached to the DBM-150,
attach this to the non-operator’s side of the DBM-150.
(p.3-4)
[7] Side guide F (L) 1 When stapling paper whose length is 279 mm/10.98 inches or more or
when the CORNER AND STAPLE KIT has been attached to the DBM-150,
attach this to the operator’s side of the DBM-150.
(p.3-4)
[8] Side guide B (S) 1 When stapling paper whose length is less than 279 mm/10.98 inches,
attach this to the non-operator’s side of the DBM-150.
(p.3-4)
[9] Side guide F (S) 1 When stapling paper whose length is less than 279 mm/10.98 inches,
attach this to the operator’s side of the DBM-150.
(p.3-4)
[10] Joint bracket B (L) 1 When stapling paper whose width is 148 mm/5.83 inches or more,
attach this to the side guide B (L) or (S).
(p.3-4)
[11] Joint bracket F (L) 1 When stapling paper whose width is 148 mm/5.83 inches or more,
attach this to the side guide F (L) or (S).
(p.3-4)
[12] Joint bracket B (S) 1 When stapling paper whose width is less than 148 mm/5.83 inches or
when the CORNER AND STAPLE KIT has been attached to the DBM-150,
attach this to the side guide B (S).
(p.3-4)
[13] Joint bracket F (S) 1 When stapling paper whose width is less than 148 mm/5.83 inches or
when the CORNER AND STAPLE KIT has been attached to the DBM-150,
attach this to the side guide F (S).
(p.3-4)