2-14
Chapter 2 Basic Operation
- Pressing the
key moves the back guide
position by approx. 0.5 mm/0.02 inch
backward.
- Pressing the
key moves the back guide
position by approx. 0.5 mm/0.02 inch
forward.
4
Press the key.
The top screen will be displayed.
6-1-2. Adjusting the distance between the right and left side guides
Adjust the position of the side guides between the right and left.
1
When the top screen is displayed, press
the key on the control panel.
+0
Back Guide
Step Mode
Side Guide
+0
2
Press the key to select [Side Guide].
3
Press the key or key to change the
value.
- Pressing the
key widens the distance
between the right and left side guides by
approx. 0.3 mm/0.01 inch.
- Pressing the
key narrows the distance
between the right and left side guides by
approx. 0.3 mm/0.01 inch.
4
Press the key.
The top screen will be displayed.
6-2. When stapling and folding positions do not align
Correct example
The folded line and stapled
position are aligned.
The folded line is
slightly deviated above
the stapled position.
The folded line is slightly
deviated below the stapled
position.
Fine adjust the stapling position
or folding position.
Paper ejection
direction
Fine adjust the stapling position
or folding position.
To Next Page
Loading...
Need help?
General
