5-3
Chapter 5 Trouble Guide
Error
Code
Cause Solution
E100 An error related to the motor has occurred. Clear the error.
E200
E210
E220
E300
E310
E320
E400
E410
E420
E500
E510 The connector of the stapler unit F is
disconnected.
Insert the connector of the stapler unit F into the
machine.
(p.2-5)
An error related to the motor has occurred. Clear the error.
E520 An error related to the motor has occurred. Clear the error.
E530 The connector of the stapler unit B is
disconnected.
Insert the connector of the stapler unit B into the
machine.
(p.2-5)
An error related to the motor has occurred. Clear the error.
E600 An error related to the motor has occurred. Clear the error.
E610
E700
E710
E720
E800
E820
E830
E840
E850
E860
E921 When the upstream unit is connected to the
DBM-150, only the power switch of the DBM-
150 is turned on.
Turn on the power switch of the upstream unit to
operate the DBM-150.
(p.2-1)
If the error occurs when the settings of the power
switches are correct, turn o and on the power. If the
error does not disappear, contact your dealer.
E981 to
E989
1-4. Errors requiring a service call
When the following error codes are displayed, turn o and on the power. If the error is not solved by turning
o and on the power, contact your dealer.
E910 to E917, E920, E940, E941, E960, E961, E992
When [U900] is displayed, It is time for the periodical maintenance. Contact your dealer.
When you hear “pi, pii” or “pi, pi, pi, pi, pii” sound, contact your dealer.
To Next Page
Loading...
Need help?
General
