Duplo DBM-150T - Workflow

1-22
Chapter 1 Before Operation
6. Workflow
The owchart below describes basic operating procedures. See the text and the relevant pages.
Turn on the power
(p.2-1)
Make settings on the control panel
(p.2-2)
Preparing the DBM-150
(p.2-5)
Prepare the upstream unit
(p.2-11)
Perform operations step by step
(p.2-11)
Check a nished set
(p.2-13)
Adjust each part
(p.2-17)
Start operations
(p.2-21)
Turn o the power
(p.2-1)