11
6. PRECAUTIONS BEFORE USE
• If the paper is not stacked properly lengthwise, mis-feed
or chain feed may occur.
• When stacking just a few sheets of paper on the paper
feed table, lower the paper set lever while pressing the
back edge of the paper.
• Adjust so that the front part of the paper touches the
paper feed ring in front lightly.(Arrow)
• The paper will be folded as shown in the figure if placed
with the printed surface up on the paper feed table.
• For “accordion fold” and “irregular accordion fold”, the
printed surface of some paper will be folded outwards.
Paper
Guide plate
Paper set lever
To Next Page
Loading...
Need help?
General
