50
14. CLEANING THE UNIT
• As paper shreds, ink of printed paper on the rubber roll and paper feed ring will cause
problems, clean these parts according to the following procedures.
• To ensure safety, always turn off the power of the unit first before cleaning.
14-1. CLEANING THE RUBBER ROLL
1 Open the top cover.
2 Remove the first and second folding
plates completely as shown in the
figure.
3 Rotate the rubber roll, and clean off
the dirt with a cloth moistened with
neutral detergent or alcohol.
Top cover
Second folding plate
First folding plate
Rubber roll
To Next Page
Loading...
