34
• As shown in the figure, cross folding
means folding single folded paper
again.
• Paper can be cross folded into various
shapes depending on use.
10-1. PRECAUTIONS UPON USE
(1) The maximum paper thickness is 104.7g/m
2
. However, this thickness may differ slightly
according to various conditions such as environmental conditions (temperature,
humidity), paper size, type of paper, paper couch conditions, and printed surface
conditions.
10-2. CROSS FOLDING OF FIXED PAPER
• The following describes the cross
folding shown in the figure and the
procedures for it.
• Start cross folding according to the
following procedures.
1 First, adjust the rough adjustment
knob of first folding plate to the mark
for single fold.
• After adjusting the position of this knob, be sure to
rotate the fine adjustment knob several times.
Although the rough adjustment knob can be
moved up and down, it cannot be rotated.
2 Next, adjust the rough adjustment
knob of the second folding plate to
“End”.
(2) When the paper is cross folded, Σ shape
folding, folding slippage in the
horizontal direction may occur due to
conditions such as environmental
conditions (temperature, humidity),
paper thickness, paper size, type of
paper, paper couch conditions.
Therefore do not suspect a fault.
Folded
Cross single
folding
Cross letter
folding
shape folding
To Next Page
Loading...
