32
9. USING NON-FIXED PAPER
9-1. FIXED FOLDING PROCEDURES
Start fixed folding operations for non-fixed paper according to the following procedures.
The procedures are described by taking an example of folding a sheet of 12 inch paper.
1 Measure the length of the paper.
• Use measuring instruments that are in 1 inch
2 Refer to the table of rough adjustment
knob positions and position the
rough adjustment knobs of first and
second folding plates.
• Calculating from the table, the position of the knob
of first folding plate should be set at 6 inch.
12÷2=6 inch
• Adjust the rough adjustment knob of the second
folding plate to “End”.
Folding Style Single Fold Double Fold Irregular Letter Fold Accordion Fold Brochure Fold
Accordion Fold
First Folding Plate L/2 L/2 3L/4 L/3 2L/3 L/4
Second Folding Plate END L/4 L/4 L/3 L/3 L/2
L= Length of paper
Rough adjustment knob
Rough adjustment knob
To Next Page
Loading...
