26
7. OPERATION PROCEDURES
7-6. SPECIAL FOLDING OF FIXED PAPER
1 Stack some paper on the paper feed
table.
2 Fold the paper as desired and
measure the folded paper. Adjust the
setting position of the rough
adjustment knob of the folding plate
accordingly.
3 Adjust the rough adjustment knob of
the first folding plate to the mark
corresponding to measurement A.
• The rough adjustment knob can be moved freely
by pulling it up.
Although the rough adjustment knob can be
moved up and down, it cannot be rotated.
• After adjusting the position of this knob, be sure to
rotate the fine adjustment knob several times.
Paper
Accordion fold
Rough adjustment knob
Fine adjustment knob
To Next Page
Loading...
