38
2 Set the paper feed pressure adjusting
knob to “thin paper”.
• If the paper slips, and no paper is conveyed, raise
the paper feed pressure from “thin paper” to “thick
paper”.
3 Adjust the position of the stacker
rollers.
Reference: Refer to “7. Operation Procedures”.
4 Press the start button to test the
folding.
• Check that the paper is folded properly.
• Check the second piece of paper folded first.
If the paper has not been folded properly,
correct the problem first before proceeding
onto the next step.
5 Press the start button to begin
operations.
Paper feed pressure adjusting knob
Stacker rollers
Paper for testing folding
10. CROSS FOLDING (Optional-Cross Folding kit is required)
To Next Page
Loading...
