Programming
134 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Stacker/smoother/blow-off/roll-off
The display switches to Stacker/smoother/blow-off/roll-off.
Fig. 112: Stacker/smoother/blow-off/roll-off
Symbols Meaning
Stacker On/Off
• only with active throw-over stacker or pincer stacker p. 138
Set the duration grip stacker signal
• only with active pincer stacker p. 138
• 0 ms - 1000 ms
Select earlier clamping time
• 0 ms - 1000 ms
Smoother On/Off
• only with active smoother p. 138
Set smoother: Start after corner cut
• only with active smoother p. 138
• 0 ms - 1000 ms
Set delayed lifting of transport clamp after corner cut
• 0 ms - 1000 ms
Blow-off On/Off
• only with active blow-off p. 138
Set the duration for which the blow-off will be blowing
• only with active blow-off p. 138
• 0 ms - 1000 ms
Roll-off On/Off
To Next Page
Loading...
