DURKOPP ADLER 745-35-10 S - Page 140

Programming
138 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
Symbol Description
Select working method  p. 140
• Working method
• Maximal sewing length
Select needle distance  p. 141
Hook thread monitor On/Off
• If activated, the hook thread monitor does not appear in the global
parameters  p. 146
• If deactivated, the hook thread monitor appears in the global
parameters and must be configured manually
Tape feeder On/Off (745-35-10 A only)
Vacuum On/Off
Downholder On/Off
Select stacker/pincer stacker/smoother/blow-off
• Stacker Off
• Throw-over stacker
• Pincer stacker
• Smoother
• Blow-off
Roll-off On/Off (745-35-10 A only)
Select flap clamps
• no flap clamp
• left flap clamp only
• right flap clamp only
• left and right flap clamp
Set light barrier scan  p. 143
Waistband clamp On/Off (745-35-10 A only)