Operation
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 57
EXAMPLE: Hind trousers without flap, with underlaid pocket bag
(745-35-10 A)
Fig. 47: Hind trousers without flap, with underlaid pocket bag 745-35-10 A (1)
To sew a pair of hind trousers without flap and with underlaid pocket bag:
1. Select pocket program on the control panel ( p. 97).
2. Push the pocket bag under the pocket bag clamp (1) and line it up with
the markings (2). Use markings, e. g. strips of adhesive tape attached
to the fabric sliding plate.
Fig. 48: Hind trousers without flap, with underlaid pocket bag 745-35-10 A (2)
3. Position the hind trousers at the rear positioning point (5) and the
markings (2)
(1) - Pocket bag clamp (2) - Markings
(2) - Markings
(3) - Downholder
(4) - Waistband clamp
(5) - Rear positioning point
To Next Page
Loading...
