Operation
58 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
4. Tap the pedal.
The hind trousers are clamped in position by the downholder (3) and
the waistband clamp (4).
Smooth out the clamped hind trousers in the dart area.
5. If additionally equipped with vacuum: Tap the pedal.
The vacuum is switched on.
Fig. 49: Hind trousers with flap, with underlaid pocket bag 745-35-10 A (3)
6. Tap the pedal.
The transport clamps move to the front and lower onto the workpiece.
7. Position the piping strip (7) on the transport clamps flush with the front
edges (6). The alignment of the different types of piping on the transport
clamps is described in more detail below.
8. Tap the pedal.
The folder (8) lowers.
9. Tap the pedal again.
The sewing process starts.
(6) - Front edges
(7) - Piping strip
(8) - Folder
To Next Page
Loading...
