Operation
Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017 67
Fig. 59: Positioning and starting sewing process (3)
To position a piping strip:
1. Position the piping strip (13) on the transport clamps.
• Left jacket front parts: Position the piping strip (13) flush at the front
edges (14).
• Right jacket front parts: Position the piping strip (13) approx. 20 mm
behind the light spot (8).
Fig. 60: Positioning and starting sewing process (4)
(13) - Piping strip (14) - Front edges
(5) - Stop
(7) - Stop
(10) - Flap
(15) - Stop
(16) - Flap clamp
(17) - Folder
(18) - Flap clamp
To Next Page
Loading...
