Programming
96 Operating Instructions 745-35-10 S/745-35-10 A - 03.0 - 04/2017
2. Press the desired button.
The user interface for setting the desired item is displayed.
Marking lamps 1-16 (745-35-10 A only) p. 109
Sewing head parameters p. 110
Middle knife parameters p. 113
Corner knife parameters p. 115
Automatic tape feeder (745-35-10 A only) p. 120
Transport clamp p. 121
Process of transport clamp p. 124
Program loading process p. 127
Stacker/smoother/blow-off/roll-off p. 134
Tape trimming On/Off (745-35-10 A only)
Reset seam program
Symbols Meaning
To Next Page
Loading...
