Dynavin 9 - Sound Menu; Sound Settings - Menu

20
Sound Setup File Import:
After downloading the audio settings file from flex.dynavin.com, place the file in the root directory of the USB
stick and plug it to the "MDI&CP" USB port of the DYNAVIN system. Then, click the button indicated below to
import the downloaded file.
Fade - Balance - Delay -Gain:
To adjust the fader and balance, simply drag the crosshairs on the touchscreen display to the desired point in
the displayed vehicle interior. A more detailed explanation can be found on page 21.
Equalizer:
16 equalizer presets allow quick adjustment of the sound reproduction to different sound modes such as rock,
pop and jazz. For a more detailed explanation, see page 23.
Crossover:
In this menu you can define limit frequencies for your speakers. This ensures that the loudspeaker signals are
repro
duced without distortion for each area. A more detailed explanation can be found on page 22.
Bass Boost:
In this menu you can adjust settings of the bass boost. A more detailed explanation can be found on page 22.
Subwoofer:
In this menu you can adjust settings of the subwoofer. A more detailed explanation can be found on page 22.
Source Volume:
In this menu you can make volume adjustments for each of the different media sources (e.g. radio, US
B).
A more detailed explanation can be found on page 23.
Navigation Volume:
Use the fader to adjust the volume of the navigation announcements.
You can do this additionally via the right knob, but only during an announcement.
Maximum switch-on volume:
To adjust the volume of the radio switch-on t
o the desired value.
Entertainment fading while parking:
To adjust the multimedia sound volume to the desired value when you are parking.
Confirmation Tone:
Set the volume of the key tones. Activate the field with a check mark. Then press on the fader in the right
column and drag it to the desired volume.
Loud:
Boosts the bass and treble to achieve an amplification effect. Place a checkmark to the left of “Loud” to
activate this function.
Factory Amplifier HiFi:
In some vehicles with factory installed amplifiers, the power output
from our device may be too high.
You can lower the output level with this setting.