EasyManua.ls Logo

Dynavin 9 - General Information

Dynavin 9
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
02 03 04 04 06 07 08 09 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46
General Information
During the development of this product, special attention was paid to your personal safety, combined
with the greatest possible ease of use, modern design and current production techniques.
However, despite all due care, it is possible that improper installation or incorrect operation may result in
personal injury or damage to property.
Therefore, please read these operating instructions carefully and completely and keep them in a safe place.
This product complies with the requirements of the applicable European and national directives.
Conformity has been proven, the corresponding documents and declarations are on file with the manufacturer .
We reserve the right to make unannounced product-related changes at any time in the interests of technical
progress and adaptation to the vehicle market.
Check the legal regulations of your country before installing the device. Failure to comply with the legal
requirements may result in significant penalties.
In the case of warranty claims, the device must be sent to us in the original packaging with the enclosed proof
of purchase and a detailed description of the fault. Please note the return regulations on our website
www.dynavin.de/en/return-of-goods-rma (RMA procedure). The legal warranty regulations apply.
.
Despite all efforts, not all vehicles or equipment variants of the vehicles can be guaranteed that the
products offered and specified by us are 100% compatible. If you have any questions regarding product
compatibility, please feel free to contact us at any time. Our expert staff in the service area will help you
further.
If the electrical system of your vehicle suddenly shows irregular or faulty function, disconnect the product from
the vehicle electronics and contact a specialist workshop for inspection.
Dynavin is not liable for any direct or indirect consequential damage or loss, nor does Dynavin assume any
possible installation and removal costs and/or diagnostic fees.
All steps necessary for installation are carried out at the customer's request, with the knowledge that a
possible incompatibility may be present or that the product used may fail due to operational reasons.
The warranty claim and the operating permit expire due to:
1. unauthorized modifications to the device or accessories that have not been carried out or approved by
the manufacturer
2.
Opening the housing of the device
3.
Self-performed repairs on the device
4. Improper use / use not in accordance with the intended purpose
5. Accidental damage (including but not limited to dropping the unit, willful destruction, vehicle accident,
etc.)
Observe all safety-related and legal regulations during installation.
For these reasons we recommend:
Do not install the device without knowledge in this area and consult a car audio specialist. Installations may
only be carried out in a de-energized state. For certain installations, the vehicle battery must therefore be
disconnected from the vehicle electrical system. Pay attention to the regulations of the vehicle manufacturer,
as interference with the vehicle electronics can lead to loss of the vehicle warranty.
Never use safety-related connections or attachment points, such as steering, braking systems or other
vehicle-related safety components, as doing so may endanger your own safety while driving and that of other
drivers.
Only connect the device to the vehicle-specific power supplies and ground points specified by us. Avoid
changing any settings on the device that could distract you from driving safely and cause you to endanger
yourself and/or other drivers on the road.

Related product manuals