OBC
The Dynavin unit provides you with the option to display some vehicle car information.
The information displayed depends upon the make, model, year of the vehicle as well as its software
version. Therefore, the information displayed varies from vehicle to vehicle. The Dynavin has limited
ability to read car information. Vehicle information details cannot be given or guaranteed before the
installation of the unit.
If some information is not displayed in the system, it is possible that the Dynavin unit cannot read this
information with the current firmware. You may need to update to the current firmware. (See page 74
for instructions on how to update your Dynavin’s firmware.)
Some of the information that can be read by the Dynavin (varies by vehicle):
Engine Oil Temperature
Battery Voltage
Coolant Liquid Temperature
Outside Temperature
The information displayed does not replace the vehicle's information.
If warnings from the vehicle's own monitoring stations take place, immediately seek a specialist
workshop even if the information of the Dynavin unit may be displayed normally.
To Next Page
Loading...
