Updating Unit Firmware
In the Main Menu, select the Info icon. Here you will find some of the Dynavin’s system information
and the ability to update its firmware.
Here you can see, for example, the version of the
DynOS operating system, serial number, and how
much internal memory you available.
Before Installing:
You only need to update the firmware if your Dynavin is not functioning normally or if you are explicitly
instructed on Dynavin’s homepage or by a Dynavin distributor to do so.
Each update will be installed at your own risk. Dynavin is not responsibility for errors which may occur
during the update resulting in the malfunctioning of the unit. Please ensure that during a firmware
install that you have constant power to the unit and there is no power failure or other voltage
fluctuations. This may interfere with the update process and make the device unusable.
Use only media cards which are 100% failure free. If you use a defective memory card it is possible
that the update will not be able to install or that the update will damage your unit.
Use only firmware updates for your Dynavin that are approved by Dynavin and are found on Dynavin’s
website. Visit www.dynavin.com for available updates and to determine whether your Dynavin
requires an update
.
To Next Page
Loading...
