Eaton 9390 - Page 73

Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F 58
Press the LLOOGG pushbutton on the Battery Discharge Log Summary Menu bar to display the Battery Discharge
Log screen.
The Battery Discharge Log screen displays the individual log entries including the date and time of the event,
how long it was on battery, the UPS load when the event occurred, and the end voltage of the battery for that
discharge period. If no events have occurred, the screen will display LOG EMPTY. Figure 28 shows the Battery
Discharge Log screen.
To scroll through the individual events, press the
USING THE CONTROL PANEL
Eaton 9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4
8-4
8.2.2 Event Screens
Press the EVENTS pushbutton on the main menu bar or History Menu bar to display a
listing of all system events that are currently active. The most recent event is listed
first. As events clear, they are removed from the Active System Events listing.
Figure 8‐4 shows the Active Events screen.
To scroll through the events, press the
or pushbuttons on the menu bar.
ACTIVE EVENTS
HISTORY
ALARM: INPUT AC UNDERVOLTAGE
ALARM: BYPASS AC UNDER VOLTAGE
NOTICE: BATTERY VOLTAGE LOW
NOTICE: NO SYNC ON
NOTICE: BYPASS NOT AVAILABLE
NOTICE: CONFIGURATION ERROR
Figure 8‐4. Active Events Screen
or
USING THE CONTROL PANEL
Eaton 9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4
8-4
8.2.2 Event Screens
Press the EVENTS pushbutton on the main menu bar or History Menu bar to display a
listing of all system events that are currently active. The most recent event is listed
first. As events clear, they are removed from the Active System Events listing.
Figure 8‐4 shows the Active Events screen.
To scroll through the events, press the
or pushbuttons on the menu bar.
ACTIVE EVENTS
HISTORY
ALARM: INPUT AC UNDERVOLTAGE
ALARM: BYPASS AC UNDER VOLTAGE
NOTICE: BATTERY VOLTAGE LOW
NOTICE: NO SYNC ON
NOTICE: BYPASS NOT AVAILABLE
NOTICE: CONFIGURATION ERROR
Figure 8‐4. Active Events Screen
pushbuttons on the menu bar. To return to the
Battery Discharge Log Summary screen, press the SSUUMMMMAARRYY pushbutton on the menu bar.
To clear the Battery Discharge Log, press the RREESSEETT pushbutton on the menu bar.
FFiigguurree 2288.. BBaatttteerryy DDiisscchhaarrggee LLoogg SSccrreeeenn
BATTERY DISCHARGE LOG
SUMMARY
DATE : 07/28/2005
LOAD WHEN ON BATTERY
END VOLTAGE :
TIME ON BATTERY
TIME : 15 : 26 : 10
***.** KW
***.** V
RESET
BATTERY DISCHARGE EVENT
1/ 1
** M ** S
Using the Control Panel
For Internal Use Only