Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F 68
Press the LLOOGG pushbutton on the Maximum Current Log Summary Menu bar to display the Maximum Current
Log screen.
The Maximum Current Log screen displays the individual log entries, including the interval date and time frame,
the maximum percent of full load during the interval, the total time over limit during the interval, and the
number of times over during the interval. If the individual phase option is selected, the phases that exceeded
the limit will also be displayed. If no events have occurred, the screen will display LOG EMPTY. Figure 38 and
Figure 39 show the Maximum Current Log screens.
To scroll through the individual events, press the
USING THE CONTROL PANEL
Eaton 9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4
8-4
8.2.2 Event Screens
Press the EVENTS pushbutton on the main menu bar or History Menu bar to display a
listing of all system events that are currently active. The most recent event is listed
first. As events clear, they are removed from the Active System Events listing.
Figure 8‐4 shows the Active Events screen.
To scroll through the events, press the
or pushbuttons on the menu bar.
ACTIVE EVENTS
HISTORY
ALARM: INPUT AC UNDERVOLTAGE
ALARM: BYPASS AC UNDER VOLTAGE
NOTICE: BATTERY VOLTAGE LOW
NOTICE: NO SYNC ON
NOTICE: BYPASS NOT AVAILABLE
NOTICE: CONFIGURATION ERROR
Figure 8‐4. Active Events Screen
or
USING THE CONTROL PANEL
Eaton 9390 UPS (20–80 kVA) and 9390IT (20-40 kVA) Installation and Operation Manual S 164201603 Rev 4
8-4
8.2.2 Event Screens
Press the EVENTS pushbutton on the main menu bar or History Menu bar to display a
listing of all system events that are currently active. The most recent event is listed
first. As events clear, they are removed from the Active System Events listing.
Figure 8‐4 shows the Active Events screen.
To scroll through the events, press the
or pushbuttons on the menu bar.
ACTIVE EVENTS
HISTORY
ALARM: INPUT AC UNDERVOLTAGE
ALARM: BYPASS AC UNDER VOLTAGE
NOTICE: BATTERY VOLTAGE LOW
NOTICE: NO SYNC ON
NOTICE: BYPASS NOT AVAILABLE
NOTICE: CONFIGURATION ERROR
Figure 8‐4. Active Events Screen
pushbuttons on the menu bar. To return to the
Maximum Current Log Summary screen, press the SSUUMMMMAARRYY pushbutton on the menu bar.
To clear the Maximum Current Log, press the RREESSEETT pushbutton on the menu bar.
FFiigguurree 3388.. MMaaxxiimmuumm CCuurrrreenntt LLoogg SSccrreeeenn ((TThhrreeee--PPhhaassee MMeeaassuurreemmeenntt))
MAXIMUM CURRENT LOG
SUMMARY
INTERVAL : 07/30/2005
TIME OVER LIMIT
15 : 26 : 10 – 15 : 30 : 10
*** . ** %
2 MINUTES
3
RESET
MAXIMUM CURRENT EVENT
NUM TIMES OVER THIS INTERVAL
2/ 5
MAXIMUM % OF FULL LOAD
Using the Control Panel
To Next Page
Loading...
