144
4. Electro-Hydraulic Control Unit 01/2018 Rev. 1 EA(B)O-6X06
Electro-Hydraulic Control Unit
Disassembly and Assembly
3. Apply 0.4 g of Nyogel to the solenoid valve connectors
and plug it on.
0037-18
0038-18
2. Tighten the electrovalve bolts with the specied torque.
0039-18
Reservoir Replacement
Disassembly
1. Loosen the upper screw.
2. Turn the electro-hydraulic unit upside down and drain
the oil from the reservoir into a clean container, and also
drain the oil from the engine compartment.
3. Return the unit to the upright position.
To Next Page
Loading...
