71
EA(B)O-6X06 01/2018 Rev. 1 3. Disassembly and Assembly
6067
6064
6069
6070
Mainshaft
Disassembly
1. Remove the 5th speed synchronizer cone.
2. Remove the “pocket” bearing snap ring.
4. Place the mainshaft in vertical position on a work bench
with the “pocket” end facing up and the rear (yoke) end
supported on the special tool EEA-17506.
3. Remove the sleeve and the three keys of the 5th and
6th speed synchronizer.
NOTE: Pay attention not to drop and lose the keys.
To Next Page
Loading...
