136
4. Electro-Hydraulic Control Unit 01/2018 Rev. 1 EA(B)O-6X06
3. Pull the lower latch slightly and pull out the connector.
Electric Harness Replacement
Disassembly
NOTE: Before disassembling, mark the position of
the connectors and clamps (dierent diameters) in
order to avoid its inversion in the assembly.
1. Loosen the electrical connections of the selection and
coupling sensors.
2. To release the electric motor connector, lift the orange
latch with a screwdriver.
4. Loosen the solenoid valves connectors.
0011-18
0012-18
0010-18
0009-18
Electro-Hydraulic Control Unit
Disassembly and Assembly
To Next Page
Loading...
