Eaton EAO-6206A - Maximum Pressure Valve Replacement

156
4. Electro-Hydraulic Control Unit 01/2018 Rev. 1 EA(B)O-6X06
Electro-Hydraulic Control Unit
Disassembly and Assembly
0112-18
0114-18
Assembly
1. Before mount it back, install a new o’ring lubricated with
oil on the valve (see detail).
2. Fit the valve and apply the specied torque.
2. Proceed in the reverse order of disassembly, passing a
thin layer of its own oil into the piston before assembling
it.
0113-18
Maximum Pressure Valve Replacement
Disassembly
1. With a 17 mm wrench, loosen the maximum pressure
valve.
CAUTION! After mounting the locking ring
rotate it inside its housing to make sure it
is properly installed.