17
EA(B)O-6X06 01/2018 Rev. 1 1. General Information
Oil seals and snap rings
Any oil seal, snap ring, etc. damaged during maintenance,
should be replaced by a new one. Replacement
of oil seals and snap rings is cheaper when unit is
disassembled than a premature overhaul to replace
these parts in a future time.
An oil leakage through a worn seal may result in
failures of other more expensive components of the
transmission. The sealing elements should be handled
carefully, particularly during assembly. Cuts, scratches
or rolled up seal lips decrease the sealing eciency.
NOTE: When assembling the transmission, apply
petroleum jelly onto oil seal lips.
Precautions
To Next Page
Loading...
