52
3. Disassembly and Assembly 01/2018 Rev. 1 EA(B)O-6X06
6465
6462
46. With the special base EEA-17505 already placed on the
workbench, position the shafts and shift rails assembly
on the base, and lower the shafts tting the input shaft
and countershaft into their housings in the device.
6482
47. After shafts and shift rails assembly is supported on the
device EEA-17505, cut the strap used to hold the shafts
and shift rails assembly tied together.
6460a
45. With a hoist, lift shafts and shift rails assembly holding
the input shaft with one hand to hold the shaft in place.
Transmission Disassembly
To Next Page
Loading...
