81
EA(B)O-6X06 01/2018 Rev. 1 3. Disassembly and Assembly
6219
6221
6220
6222
6227
6225
5. Install the second 1st and 2nd speed synchronizer hub
snap ring.
6. Install the 1st speed synchronizer ring (tricone) outer
ring, with the teeth side facing up, matching the ridges
on the ring to the slots on the hub.
7. Install the 1st speed synchronizer ring (tricone) middle
ring, with the tabs on the ring facing up.
8. Install the 1st speed synchronizer ring (tricone) inner
ring, with the tabs on the ring facing down.
Mainshaft
To Next Page
Loading...
